1.
Backlight compensation (standard value:
0
)
Run the
backlight
command to turn on or off backlight compensation (
0
: off;
1
: on). The
command format is as follows:
camera setc500Cameraparm backlight:0 camport:5
Generally, you do not need to change the settings of this parameter.
2.
Shutter speed (standard value:
6
)
Run the
speed
command to set
Shutter speed
(value range:
1
–
15
). The command format
is as follows:
camera setc500Cameraparm speed:6 camport:5
Note: If the screen blinks, set
Shutter speed
to
8
.
3.
Shutter delay (standard value:
0
)
Run the
slowshtlimit
command to set
ShutterLimit VAL
(value range:
0
–
2
). The
command format is as follows:
camera setc500Cameraparm slowshtlimit:0 camport:5
Generally, you do not need to change the settings of this parameter.
Step 4
Set the manual focus value.
1.
Set the focus mode to manual focus by running the following command:
camera setc500CameraParam focusswitch:1 camport:5
2.
Set
Focus VAL
to the standard value
9000
by running the following command:
Camera setc500CameraParam focusval:9000 camport:5
See the following figure.
Step 5
Set the aperture.
Set
Aperture VAL
(value range:
0
–
15
) to the standard value
8
by running the following
command:
camera setc500Cameraparm aperture:8 camport:5
HUAWEI TP3106&TP3118&TP3118S
Commissioning Guide
7 Appendix
Issue 01 (2015-02-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
8
