Huawei TP3106, Руководство по установке

Страница: 39 / 152

Figure 7-2 Mounting the HD display
1.
Lift an HD display and place it into the HD display base.
2. Hang the HD display on the center rack. Arrange another person to check the hole alignment
at the rear of HD display.
3. Tighten the screws using an H6 Allen wrench.
Step 3
Tighten the four support legs of the center rack to fix the center rack.
Step 4 Adjust the level and pitch angle of the HD display.
l Fine-tune the pitch angle of the center HD display to 90 degrees, as shown in Figure 7-2 .
l Use a measuring tape to measure the distance between the HD display base and the floor, as
shown in
Figure 6-4 .
Fine-tune the HD display base, if required, to ensure that the distance is 630 mm, as shown
in
Figure 6-5 .
l Use a spirit level to check the center HD display along axes X and Y, as shown in Figure
7-3 .
HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
7 Installing the HD Displays
Issue 07 (2013-11-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34