Huawei Telecom Power TP48200A-DT19C1 Скачать руководство пользователя страница 3

Страница: 3 / 114

TP48200A-DT19C1, TP48200A-DT19C2,
TP48200A-HT19C1 and TP48200A-HT19C2 Telecom
Power
User Manual

Preface

Issue 03 (2019-11-15)

Preface

Purpose

This document describes the DC power systems in terms of their features, configurations,
components, and maintenance methods.

The figures provided in this document are for reference only.

Intended Audience

This document is intended for:



Sales engineers



Technical support personnel



Maintenance personnel

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not avoided, will
result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided,
could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could
result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could
result in equipment damage, data loss, performance deterioration, or
unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury,
equipment damage, and environment deterioration.

Содержание Telecom Power TP48200A-DT19C1



















































































































Результаты поиска

Содержание Telecom Power TP48200A-DT19C1

Отзывы:

Похожие инструкции для Telecom Power TP48200A-DT19C1

Бренды по названию

Популярные бренды

Huawei Telecom Power TP48200A-DT19C1, Руководство пользователя

Результаты поиска

Содержание Telecom Power TP48200A-DT19C1

Отзывы:

Похожие инструкции для Telecom Power TP48200A-DT19C1

Бренды по названию

Популярные бренды