Huawei TE80 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 178

background image

HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide

1 Overview

Issue 02 (2014-03-30)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

7

The endpoint complies with Directive 2002/96/EC on waste electrical and electronic
equipment (WEEE). Huawei is responsible for recycling its end-of-life devices, and please
contact Huawei local service center when recycling is required. Huawei strictly complies with
the EU Waste Electrical and Electronic Equipment Directive (WEEE Directive) and electronic
waste management regulations enacted by different countries worldwide. In addition, Huawei
has established a system for recycling and reuse of electronic wastes, and it can provide
service of dismantling and recycling for WEEE. By Huawei recycling system, the waste can
be handled environmentally and the resource can be recycled and reused fully, which is also
Huawei WEEE stratagem in the word. Most of the materials in the endpoint are recyclable,
and our packaging is designed to be recycled and should be handled in accordance with your
local recycling policies.

In accordance with Article 11(2) in Directive 2002/96/EC (WEEE), The endpoints were
marked with the following symbol: a cross-out wheeled waste bin with a bar beneath as
below:

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:



This device does not cause harmful interference.



This device must accept any interference received, including interference that may cause
undesired operation.

If this device is modified without authorization from Huawei, the device may no longer
comply with FCC requirements for Class A digital devices. In that a case, your right to use the
device may be limited by FCC regulations. Moreover, you may be required to correct any
interference to radio or television communications at your own expense.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate
the equipment.

«
...
13
14
15
16
17
...
»

Содержание TE80



















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TE80

Бренд: Balboa Страницы: 74

Бренд: WesAudio Страницы: 65

Бренд: ewoo Страницы: 85

RaptorX-SL1200-S15

Бренд: CNC-Step Страницы: 102

Бренд: Steg Страницы: 9

Бренд: iWantit Страницы: 32

VideoJet 400 19"

Бренд: VCS Страницы: 86

Бренд: Raven Страницы: 47

Dialog 4220 Lite

Бренд: Astra Страницы: 40

Бренд: Volvo Страницы: 4

Бренд: Raven Страницы: 90

Бренд: a/d/s/ Страницы: 14

Бренд: LENCO Страницы: 47

SOUND PLATFORM SP2.1

Бренд: Jazz Страницы: 12

Бренд: SKUTCH Страницы: 26

Бренд: Polycom Страницы: 92

Бренд: Dahua Страницы: 30

Бренд: Elta Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды