●
Separate network cables from power cables when routing.
●
The minimum bend radius of a network cable is 4 cm (1.57 in.). Check that
the cable insulation layer is intact. Ensure that cables are routed for easy
maintenance and capacity expansion.
●
Bind cables with ties when routing. Ensure that optical cables are routed
straightly and bound neatly and that cable ties are installed at even spacing
and fastened properly.
Step 5 Remove the network cable to be replaced.
Step 6 Install the new network cable.
●
Connect the new network cable to the same port as the removed one.
●
Install the network cable in the network port securely.
Figure 5-11 Connecting a network cable
Step 7 Connect the other end of the network cable to the peer network port according to
the network plan.
●
Connect the new network cable to the same port as the removed one.
●
Install the network cable in the network port securely.
Step 8 Check that the new network cable is functioning properly.
Power on the device, and ping the peer device connected by the new network
cable. If the peer device cannot be pinged, check whether the network cable is
damaged or the connectors are securely connected.
Step 9 Bind the new network cable with other cables.
Bind the new network cable in the same way as the existing network cables. You
can also remove all cable ties and bind all of the network cables again if
necessary.
----End
5.8.4 Connecting a Cable to an Optical Port
You can connect an optical or SFP+ cable to an optical port. You need to
determine the type of cable to be connected based on site requirements.
Step 1 Wear an ESD wrist strap. For details, see
.
TaiShan 200 Server (Model 2280)
User Guide
5 Installation and Configuration
Issue 09 (2021-01-12)
Copyright © Huawei Technologies Co., Ltd.
55