Huawei TaiShan 200 23280 Скачать руководство пользователя страница 32

Страница: 32 / 191

Configuratio

Maximum

Front

Drives

Maximum Rear

Drives

Maximum PCIe

Drives

Drive

Manage

ment

Mode

● [1]: The server with 24 x 2.5" drive pass-through configuration, 8 x 2.5"

drive configuration, 25 x 2.5" drive EXP configuration, or 8 x 2.5" SAS/

SATA + 12 x 2.5" NVMe drive configuration support only 2.5" front

drives. The server with 12 x 3.5" drive EXP configuration or with 12 x 3.5"

drive pass-through configuration supports only 3.5" front drives.

● [2]: I/O module 3 supports 2.5" NVMe drives through the PCIe signals

directly from CPU 2. I/O modules 1 and 2 support 2.5" and 3.5" drives.

● [3]: CPU SAS pass-through requires a SAS riser card. By default, it is

installed in I/O module 2.

● [4]: The NVMe drives in slots 8 to 19 of the server configured with 8 x

2.5" SAS/SATA + 12 x 2.5" NVMe drives support only PCIe 3.0.

● [5]: When powered by Kunpeng 920 5220 or 3210 processors, the server

does not support 24 x 2.5" SAS/SATA pass-through drive configuration or

8 x 2.5" drive configuration.

2.6.2 SAS/SATA Drive Indicators

Figure 2-22

shows the SAS/SATA drive indicators.

Figure 2-22 SAS/SATA drive indicators

Table 2-10 Description of SAS/SATA drive indicators

Drive Activity

Indicator (Green

Indicator)

Drive Fault

Indicator (Yellow

Indicator)

Description

Steady on

Off

The drive is in position.

Blinking at 4 Hz

Off

Data is being read or written normally,

or data on the primary drive is being

rebuilt.

Steady on

Blinking at 1 Hz

The drive is being located by the RAID

controller card.

Blinking at 1 Hz

The data on the secondary drive is

being rebuilt.

Off

Steady on

A member drive in the RAID array is

removed.

TaiShan 200 Server (Model 2280)

User Guide

2 Components

Issue 09 (2021-01-12)

Содержание TaiShan 200 23280
































































































































































































Результаты поиска

Содержание TaiShan 200 23280

Отзывы:

Похожие инструкции для TaiShan 200 23280

Бренды по названию

Популярные бренды

Huawei TaiShan 200 23280, Руководство пользователя

Результаты поиска

Содержание TaiShan 200 23280

Отзывы:

Похожие инструкции для TaiShan 200 23280

Бренды по названию

Популярные бренды