manualshive.com logo in svg

Huawei TaiShan 200 2280, Руководство по техническому обслуживанию и ремонту, Страница: 114 / 209

Поделиться
Скачать
Huawei TaiShan 200 2280 Скачать руководство пользователя страница 114

Removing a Fan Module

Step 1 Wear an ESD wrist strap. For details, see 

5.2 ESD Protection

.

● You can skip steps 

Step 2

 to 

Step 4

 when you can open the chassis cover without

removing the server. The scenarios include but are not limited to: (1) the server is

installed on adjustable guide rails and (2) the server is not installed in a cabinet.

● To maintain a proper cooling effect during system operation, remove only one fan at a

time.

Step 2 Power off the server. For details, see 

5.4.2 Powering Off the Server

.

Step 3 Remove the power cables. For details, see 

5.7 PSU

.

Step 4 Remove the server. For details, see 

5.4.4 Removing the Server and Guide Rails

.

Step 5 Remove the chassis cover. For details, see 

5.8 Chassis Cover

.

Step 6 Press the latches on both sides of the fan module to unlock it. See (1) 

Figure

5-39

.

Figure 5-39 Removing a fan module

Step 7 Lift the fan module slowly until it is completely out of the slot. See (2) in 

Figure

5-39

.

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

5 Removal and Installation

Issue 04 (2020-01-16)

Copyright © Huawei Technologies Co., Ltd.

107

Содержание TaiShan 200 2280


















































































































































































































Отзывы:

Нет отзывов