manualshive.com logo in svg

Huawei pRRU3901, Руководство по обслуживанию

Поделиться
Скачать
Huawei pRRU3901 Скачать руководство пользователя страница 5

Symbol

Description

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.

Calls attention to important information, best practices and
tips.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.

 

General Conventions

The general conventions that may be found in this document are defined as follows.

Convention

Description

Times New Roman

Normal paragraphs are in Times New Roman.

Boldface

Names of files, directories, folders, and users are in

boldface

. For example, log in as user 

root

.

Italic

Book titles are in 

italics

.

Courier New

Examples of information displayed on the screen are in
Courier New.

 

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in 

boldface

.

Italic

Command arguments are in 

italics

.

LampSite
Site Maintenance Guide

About This Document

Issue 02 (2014-05-27)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

iv

Содержание pRRU3901





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды