Huawei pRRU3901 Скачать руководство пользователя страница 10

Страница: 10 / 52

Content

Change Description

Changed the pDock name from pDock with
two Ethernet ports to pDock with two
transmission ports, and pDock with three
Ethernet ports to pDock with three
transmission ports.

Compared with Draft C (2014-03-26), this issue excludes the following topic:

Replacing a PSU

Draft C (2014-03-26)

This is a draft release.

Compared with Draft B (2014-02-28), no information is added.

Compared with Draft B (2014-02-28), this issue incorporates the following change:

Content

Change Description

6 Replacing the RHUB

Deleted the operation of resetting the RHUB
after replacing.

Compared with Draft B (2014-02-28), no information is deleted.

Draft B (2014-02-28)

This is a draft release.

Compared with draft A (2013-11-30), this issue includes the following new topic:

9 Replacing the Wi-Fi Daughter Board

Compared with draft A (2013-11-30), this issue incorporates the following changes:

Content

Change Description

Entire document

Added descriptions about pRRUs with three
transmission ports. Such pRRUs support
integrated Wi-Fi services.

Added the descriptions about the UMTS, LTE
FDD and UMTS+LTE FDD mode.

About This Document

Optimized descriptions about matching
product versions.

8 Replacing the RF Daughter Board

Added the procedures for removing and
attaching labels.

LampSite
Site Maintenance Guide

1 Changes in LampSite Site Maintenance Guide

Issue 02 (2014-05-27)

Huawei Proprietary and Confidential

Содержание pRRU3901





















































Результаты поиска

Содержание pRRU3901

Отзывы:

Бренды по названию

Популярные бренды

Huawei pRRU3901, Руководство по обслуживанию

Результаты поиска

Содержание pRRU3901

Отзывы:

Бренды по названию

Популярные бренды