20
Type
Status (blinking at long intervals:
On for 1s and then Off for 1s;
Blinking at short Intervals: On for
0.2s and then Off for 0.2s)
Meaning
Battery
system
indication
N/A
Display green
Indicates battery level. One bar represents 10%.
Steady red
The first three bars indicate the number of
faulty battery expansion modules.
SmartLogger V300R001C00SPC050 and later versions support batteries. Before deployment,
upgrade the SmartLogger. After the upgrade, reconnect the SmartLogger and set battery
parameters.
Upgrading the SmartLogger
7.1
7
Device Commissioning
1. If the device is not connected to the FusioSolar management system, you are advised to use a
USB flash drive for upgrade. You can insert the USB flash drive with the upgrade package and go
to the device upgrade screen to start the upgrade.
Device Commissioning(FusionSolar APP)
7.2
7.2.1
2. If no USB flash drive is available, log in to the SmartLogger WebUI by referring to section 8.1
and choose
Maintenance
>
Firmware Upgrade
.
Downloading the App
