User Manual
iSiteC BTS3601C CDMA Base Station
System Description
Chapter 3 System Function
3-20
he can send the loading command through the remote maintenance console to
activate the software loading process.
&
Note:
The remote maintenance console means the client of the BAM at the BSC side, and the nearby
maintenance console means the client of the OMU at the BTS side. For details, please refer to the "1.1.1
Local Operation and Maintenance System" in modul 2 of this manual.
In the MBPB software loading process, the software stored in the BAM hard disk is
first downloaded to the falsh memory of MBPB, and then activated by command.
In MTRB software loading process, the software is first downloaded to MBPB, and
then downloaded to MTRB and activated.
Upon software upgrading, make sure to load the MTRB software first before loading
the MBPB software. Upon software upgrading for the individual boards, make sure to
load the FPGA software first, then the CPU software.
II. Configuration data loading
Data loading involves data downloading and uploading.
For BTS configuration data, if no "available" configuration data file exists in the Flash
Memory of MBPB, BTS3601C will send a request to BAM for configuration data
loading.
The configuration data can be downloaded in the same way as the software. The
configuration data stored in the hard disk of BAM is first downloaded to MBPB ,and
then the OMU of MBPB accomplishes the data configuration based on the
configuration data for the BTS.
BTS3601C provides the data uploading function, which enables the configuration
data of a BTS to be loaded to the specific direc tory of BAM.
3.5.2 Configuration Management
The configuration management function accomplishes the configuration for BTS
equipment, radio resource, and so on. It also enables the user to query the
configuration data.
This function can be realized through the remote maintenance console, or the nearby
maintenance console.
