12
Step 2
Choose
Basic
>
LAN
to display the
DHCPv4 Server
tab.
Step 3
In the
LAN Host Settings
section, enter a new IP address in
IP
address
. Then enter a new subnet mask in
Subnet mask
.
Step 4
Click
Submit
to save the changes.
4.7
Restoring Default Settings
If you restore the HG630 to its default settings, all customized user
data will be lost. Use this function only when necessary.
To restore the HG630 to its default settings, power on the HG630, press and
hold the
Reset
button on the rear panel for over 6 seconds, and then release
the button.
You can also do the following to restore the HG630 to its default settings from
the web-based configuration utility:
Step 5
Log in to the HG630's web-based configuration utility.
Step 6
Choose
Maintenance
>
Device
to display the
Reset
tab.
Step 7
Click
Restore Default Settings
.
Step 8
In the displayed dialog box, click
OK
.
The login page will be displayed within 2 minutes. Enter the default user name
(
user
) and password (
HuaweiUser
) to log in.
To log in to the web-based configuration utility after you change
the IP address successfully, you need to launch the Internet
Explorer, and then enter the new IP address in the address bar.
Ensure that the IP address of the computer is in the same network
subnet as that of the HG630 so that the computer can access
the web-based configuration utility.
