15
6 FAQs
Can I use the terminal as a DHCP server?
Yes, you can. The terminal incorporates the DHCP server software.
How can I quickly restore the default settings of the terminal?
To restore the default settings of the terminal, power on the terminal, press and
hold the Reset button for a minimum of over six seconds, and then release the
Reset button.
How can I change the password used to access the terminal
configuration page?
Access the terminal configuration page, choose
Tools
>
System
Management
, and then change the password on the
System Management
page.
How can I configure a computer to use a static IP address?
Take a computer that runs Windows XP as an example. To configure the
computer to use a static IP address, do as follows:
1. In the
Control Panel
window, double-click
Network Connections
to
display the
Network Connections
window.
2. In the
Network Connections
window, right-click the working
Local Area
Connection
and choose
Properties
.
3. In the
This connection uses the following items
group box of the
Local
Area Connection Properties
dialog box, select
Internet Protocol
(TCP/IP)
. Click
Properties
.
4. Select
Use the following IP address
.
5. Set the IP address of the computer and ensure that the IP address is in the
same network segment as the local area network (LAN) IP address of the
terminal.
Assume that the default LAN IP address of the terminal is
192.168.1.1
. To
set the IP address of the computer, do as follows:
Содержание HG530
Страница 1: ...HUAWEI HG530 Home Gateway User Guide ...
