Huawei HG530, Руководство пользователя

Страница: 18 / 29

16
1) In IP address , enter 192.168.1.100 . Ensure that this IP address is
unique and not used by other computers.
2) In Subnet mask , enter 255.255.255.0 .
3) In Default gateway , enter 192.168.1.1 .
6. Consult your network service provider about the IP address of the domain
name server (DNS). In Preferred DNS server and Alternate DNS server ,
enter the IP address.
If you configure the static IP address for the purposes of accessing the
Web configuration page of the terminal, you can skip this step.
7. In the Internet Protocol (TCP/IP) Properties dialog box, click OK . Then in
the Local Area Connection Properties dialog box, click OK .
What can I do if I cannot visit Web sites through the terminal?
1. Check whether the Power indicator of the terminal is on.
If the Power indicator is off, perform further checks as follows:
1) Ensure that the power switch of the terminal is turned on.
2) Ensure that electricity comes from the socket and that the input power
of the socket meets the requirements described on the label of the
terminal power adapter. If the voltage is unsteady, for example, if the
voltage is too high or too low, do not use the terminal. Wait until the
voltage restores to its normal level, and then use the terminal.
3) Ensure that the terminal is properly connected to the socket through the
power adapter.
If the Power indicator is still off, contact an authorized maintenance center.
2. After powering on the terminal, wait for about three minutes. Then check
whether the ADSL indicator of the terminal is on.
If the ADSL indicator blinks for a long time, perform further checks as
follows:
1) Ensure that telephone lines are properly connected. Especially ensure
that the telephone line connecting to the splitter is properly connected.
2) Ensure that terminal cables or telephone lines are far from the electric
appliances that generate strong magnetic or electric fields.