Huawei FusionServer Pro CH121 V5 Скачать руководство пользователя страница 15

Страница: 15 / 181

Description

Table 2-1

Indicators and buttons on the front panel

Silkscreen

Indicator/
Button

Description

Power button/
indicator

Power indicator:

Off: The device is not powered on.

Steady yellow: The device is powered on.

Blinking yellow: The power button is locked. The
power button is locked when the iBMC is starting.

Steady green: The device is ready to power on.

Power button:

When the device is powered on, you can press this
button to gracefully shut down the OS.

When the device is powered on, holding down this
button for 6 seconds will forcibly power off the
device.

When the power indicator is steady green, you can
press this button to power on the device.

UID

UID button/
indicator

The UID button/indicator helps identify and locate a
device.
UID indicator:

Off: The device is not being located.

Blinking blue: The device has been located and is
differentiated from other devices that have also
been located.

Steady blue: The device is being located.

UID button:

You can turn on or off the UID indicator by
pressing the UID button or by using the iBMC or
MM910 CLI or WebUI.

You can press this button to turn on or off the UID
indicator.

You can press and hold down this button for 4 to 6
seconds to reset the iBMC.

HLY

Health status
indicator

Off: The device is powered off or is faulty.

Blinking red at 1 Hz: A major alarm has been
generated for the device.

Blinking red at 5 Hz: A critical alarm has been
generated for the device, or the device is not
securely installed.

Steady green: The device is operating properly.

FusionServer Pro CH121 V5 Compute Node
User Guide

2 Hardware Description

Issue 06 (2019-08-10)

Содержание FusionServer Pro CH121 V5






















































































































































































Результаты поиска

Содержание FusionServer Pro CH121 V5

Отзывы:

Похожие инструкции для FusionServer Pro CH121 V5

Бренды по названию

Популярные бренды

Huawei FusionServer Pro CH121 V5, Руководство пользователя

Результаты поиска

Содержание FusionServer Pro CH121 V5

Отзывы:

Похожие инструкции для FusionServer Pro CH121 V5

Бренды по названию

Популярные бренды