Huawei FusionServer Pro CH121 V5 Скачать руководство пользователя страница 138

Страница: 138 / 181

Category

Specifications

Memory

Supports 24 memory modules of the following types:

Up to 24 DDR4 memory modules

Max. 2933 MT/s memory speed

RDIMM and LRDIMM support

The DDR4 memory modules of different types (RDIMM
and LRDIMM) cannot be used together.

NOTE

The preceding information is for reference only. Use the

Intelligent

Computing Compatibility Checker

to obtain specific information.

Storage

Supports a variety of drive configurations. For details, see

2.4.1 Drive Configurations

Supports hot swap of SAS/SATA/NVMe drives.

NOTE

The NVMe drives support:

Surprise hot swap if the VMD function is enabled and the latest
Intel VMD driver is installed.

Orderly hot swap if the VMD function is disabled.

Supports a variety of RAID controller cards. Use the

Intelligent Computing Compatibility Checker

to obtain

information about the specific RAID controller cards
supported.

–

The RAID controller card supports RAID configuration,
RAID level migration, and drive roaming.

–

The RAID controller card does not occupy a standard
PCIe slot.

For details about the RAID controller card, see

Huawei V5

Server RAID Controller Card User Guide

NOTE

If the BIOS is in legacy mode, 4Kn drives (4 KB sectors in physical
and logical layers) are not supported.

Network

Supports LOM.

Supports two 10GE Ethernet ports to connect to the Base
network ports on the switch modules in slots 2X and 3X.

The LOM ports support WOL and PXE.

NOTE

Powering off the compute node forcibly will make the WOL
function of the LOM ports invalid.

If flow control is enabled for a LOM port, the switch module
connected to the LOM port must also have flow control enabled.

FusionServer Pro CH121 V5 Compute Node
User Guide

11 Product Specifications

Issue 06 (2019-08-10)

130

Содержание FusionServer Pro CH121 V5






















































































































































































Результаты поиска

Содержание FusionServer Pro CH121 V5

Отзывы:

Похожие инструкции для FusionServer Pro CH121 V5

Бренды по названию

Популярные бренды

Huawei FusionServer Pro CH121 V5, Руководство пользователя

Результаты поиска

Содержание FusionServer Pro CH121 V5

Отзывы:

Похожие инструкции для FusionServer Pro CH121 V5

Бренды по названию

Популярные бренды