eSpace IPC 2601(5601)-P
User Guide
C Appendix 3 help Command Reference
Issue 01 (2012-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76
Step 6
Run the
./help debug close
module ID
command to disable the debug log.
For example:
./help debug close 1
.
The debug log is automatically disabled 30 minutes after the debug log is enabled.
----End
Configuring the Network Port Transmission Rate
Step 1
Log in to the Linux operating system as the
root
user.
Step 2
Run the
cd /usr/app/bin/
command.
Step 3
Run the
./help ethmode
command.
The command output is displayed:
Usage: help ethmode [Speed and Duplex]
Set Eth Mode.
0 auto
1 10M Full
2 10M Half
3 100M Full
4 100M Half
Step 4
Set the transmission rate based on site requirements.
For example, run the
./help ethmode 1
command. The network port works at 10 Mbit/s
in full duplex mode.
----End
Configuring Media Streams
Step 1
Log in to the Linux operating system as the
root
user.
Step 2
Run the
cd /usr/app/bin/
command.
Step 3
Run the
./help setmediaopen
command.
The command output is displayed:
Usage: help setmediaopen [VideoStreamType] [ProtocolType] [IPAddress]
[Port]
Set Media Stream open.
VideoStreamType:
0 Host Stream
1 Sub Stream One
2 Sub Stream Two
ProtocolType:
0 UDP
1 TCP
2 Multicast
Port:need to input even numbers.
