Interfaces and Buttons of the WS311
The following figure shows the positions of the interfaces and buttons on the WS311.
1
2
3
4
The following table lists the functions of the interfaces and the buttons.
No.
Description
1
WPS button: used to enable the WPS function.
Press and hold the WPS button of the WS311 for over 2s, and then release
it. Then press the WPS button of the wireless router within two minutes.
In this case, the WS311 can quickly and securely access the wireless
network of the wireless router.
After accessing the wireless network successfully, the WS311 ends the
WPS operation automatically. Then the wireless network can exchange
data normally. If the WS311 cannot access the wireless network within
two minutes, the WS311 automatically ends the WPS operation as well
and waits for you to set up the connection again.
2
RESET button: used to restore the default settings of the WS311.
When the WS311 is powered on, press and hold the RESET button of the
WS311 for over 6s, and then release it. Then the WS311 automatically
restarts and the default settings are restored.
3
POWER interface: used to connect the power adapter to the WS311.
4
LAN interface: used to connect the WS311 to the Ethernet interface of an
IP STB or a computer.
7
