manualshive.com logo in svg

Huawei EchoLife HG8240, Руководство по обслуживанию

Huawei EchoLife HG8240 - высококачественный сетевой терминал, обеспечивающий высокую скорость передачи данных и стабильное подключение к Интернету. Здесь вы можете скачать бесплатно сервисный мануал для Huawei EchoLife HG8240. Посетите manualshive.com, чтобы скачать руководство пользователя.

Поделиться
Скачать
background image

Step 5

Confirm that the ONT goes online normally.

After an ONT is added, run the 

display ont info

 command to query the current status of the

ONT. Ensure that 

Control flag

 of the ONT is 

active

, 

Run State

 is 

online

, 

Config state

 is

normal

, and 

Match state

 is 

match

.

huawei(config-if-gpon-0/1)#

display ont info 1 1

  ---------------------------------------------------------------------         
  F/S/P                : 0/1/1                                                  
  ONT-ID               : 1                                                      
  Control flag         : 

active

    //Indicates that the ONT is 

activated.                             
  Run state            : 

online

    //Indicates that the ONT goes online 

normally.                          
  Config state         : 

normal

    //Indicates that the configuration status of 

the 
                                          ONT is normal.     
  Match state          : 

match

     //Indicates that the capability profile bound 

to 
                                          the ONT is consistent with the actual 
capability
                                          of the ONT. 
...//The rest of the response information is omitted.

If the ONT state fails, the ONT fails to be in the up state, or the ONT does not match, check the
ONT state by referring to the above-mentioned descriptions.

l

If 

Control flag

 is 

deactive

, run the 

ont activate

 command in the GPON port mode to activate

the ONT.

l

If the ONT fails to be in the up state, that is, 

Run state

 is 

offline

, the physical line may be

broken or the optical transceiver may be damaged. You need to check both the material and
the line.

l

If the ONT state fails, that is, 

Config state

 is 

failed

, the ONT capability set outmatches the

actual ONT capabilities (For details about the ONT actual capabilities, see Reference of
GPON ONT Capability Sets. In this case, run the 

display ont failed-configuration

 command

in the diagnosis mode to check the failed configuration item and the failure cause. Then,
rectify the fault according to actual conditions.

NOTE

If an ONT supports only four queues, the values of 4–7 of the priority-queue parameter in the 

gem add

command are invalid. After configuration recovers, Config state will be failed.

l

If the ONT does not match, that is, 

Match state

 is 

mismatch

, the port types and number of

ports undermatch the actual port types and number of ports supported by the ONT. In this
case, run the 

display ont capability

 command to query the actual capability of the ONT,

and then select one of the following modes to modify the ONT configuration:

–

Create a proper ONT profile according to the actual capability of the ONT, and then run
the 

ont modify

 command to modify the configuration data of the ONT.

–

Modify the ONT profile according to the actual capability of the ONT and save the
modification. Then, the ONT automatically recovers the configuration successfully.

Step 6

Specify the native VLAN for the ONT port.
ETH port 1 on the ONT is connected to the PC and the native VLAN is VLAN 10.

NOTE

The 

ont port native-vlan

 command is used for configuring the native VLAN of an ETH port. When a packet

is transmitted to the ONT, a VLAN tag is added to the packet; when a packet is transmitted out of the ONT, the
VLAN tag is removed from the packet. This command is applicable for only the L2 service (L2 Internet access
service) when the ONT functions as a bridge device. When the ONT functions as a gateway device, the
configuration of the port VLAN is implemented on the ONT Web page, NMS, or U2560 server.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-178

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 04 (2011-01-12)

Содержание EchoLife HG8240







































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EchoLife HG8240

TCS FBI6119-0400 Manual preview
FBI6119-0400
Бренд: TCS Страницы: 56
VBOX XTI 3452 Quick Installation Manual preview
XTI 3452
Бренд: VBOX Страницы: 40
B+B KNX-GSM Gateway Documentation preview
KNX-GSM Gateway
Бренд: B+B Страницы: 19
ZIEHL-ABEGG NETcon D-G-64NE Operating Instructions Manual preview
NETcon D-G-64NE
Бренд: ZIEHL-ABEGG Страницы: 27
Wieland GW 100 Installation Instruction preview
GW 100
Бренд: Wieland Страницы: 2
eQ-3 MAX! Cube Operating Manual preview
MAX! Cube
Бренд: eQ-3 Страницы: 44
Innovision MGL60 User Manual preview
MGL60
Бренд: Innovision Страницы: 9
ZyXEL Communications 10 Series Reference Manual preview
10 Series
Бренд: ZyXEL Communications Страницы: 96
Celestix WSA 3400 Quick Start Manual preview
WSA 3400
Бренд: Celestix Страницы: 37
Raisecom ISCOM HT803G-W User Manual preview
ISCOM HT803G-W
Бренд: Raisecom Страницы: 16
Agilent Technologies E2050 Installation And Configuration Manual preview
E2050
Бренд: Agilent Technologies Страницы: 111
Pace 5168N Installation Manual preview
5168N
Бренд: Pace Страницы: 23
RTA 460EC-NNA4 Product User Manual preview
460EC-NNA4
Бренд: RTA Страницы: 59
XAVi AR396 User Manual preview
AR396
Бренд: XAVi Страницы: 76
HALLER + ERNE BG02-EIP Manual preview
BG02-EIP
Бренд: HALLER + ERNE Страницы: 19
RAK WisGate Edge Prime RAK7240 Quick Start Manual preview
WisGate Edge Prime RAK7240
Бренд: RAK Страницы: 8
RAKwireless RAK7249 User Manual preview
RAK7249
Бренд: RAKwireless Страницы: 22
David Clark 3800 U9922-G38 User Manual preview
3800 U9922-G38
Бренд: David Clark Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды