20
6 FAQs
How can I quickly enable or disable the wireless network function?
Press and hold the WLAN button for over one second, and then release the
button to enable or disable the wireless network function. The WLAN
indicator shows whether the wireless network function is enabled.
How can I quickly restore the default settings of the terminal?
To restore the default settings of the terminal, power on the terminal, press
and hold the Reset button for a minimum of over six seconds, and then
release the Reset button.
What can I do if I cannot access the Internet through the terminal?
Step 1
Check whether the POWER indicator on the terminal is solid on.
If the POWER indicator is off, perform further checks as follows:
1. Ensure that the terminal is turned on.
2. Ensure that electricity comes from the socket and that the power
input from the socket meets the requirements described on the
label of the terminal power adapter. If the voltage is unsteady, for
example, if the voltage is too high or too low, do not use the
terminal. Wait until the voltage restores to its normal level, and
then use the terminal.
3. Ensure that the terminal is properly connected to the socket
through the power adapter.
If the POWER indicator is still off, contact an authorized maintenance center.
Step 2
After powering on the terminal, wait for about three minutes. Then,
check whether the ADSL indicator on the terminal is solid on.
If the ADSL indicator blinks for a long time, perform further checks as follows:
1. Ensure that telephone lines are properly connected. Pay special
attention to the connections between the telephone lines and the
splitter.
2. Ensure that the terminal or telephone lines are far from the electric
appliances that generate strong magnetic or electric fields.
Replace telephone lines when necessary.
If the ADSL indicator still blinks and does not turn solid on, contact your network
operator.
