HTP Pro Pulse 300, Руководство пользователя

Страница: 12 / 37

12
Front Panel Controls
Fig. 4
A (Select Mode Button)— Allows you to access different welding modes by pressing repeatedly.
B, C, D, E (Setup and Selection Buttons)— The function of these buttons differs depending on which mode the
machine is in and what setup screen the machine is on. The function of the individual button is shown in the display
right above each button.
F (Left Encoder)— Turning the left encoder in manual mode adjusts the wire feed speed, while turning the left encoder
in all synergic and pulse programs adjusts the material thickness, wire feed speed, amperage, and voltage. (This can also
be done while welding).
G (Right Encoder)— Turning the right encoder in manual mode sets the voltage, while turning the right encoder in all
synergic and pulse programs adjusts the voltage of the synergic curve but does not set an absolute arc voltage as it does
in manual mode. (This can also be done by welding). If the machine is in a setup menu screen, you may use the right
encoder to scroll through lists and make adjustments as necessary.
How to Weld (Express)
1) Press and release button A (Select Mode) as often as required to set the desired mode (MIG 2T is probably the most
popular.
2) Press and release button B once to enter program selection. Use right encoder G to scroll through the program list
and find the program you need. Push and release button C to select the program, and use left encoder F to set the
desired material thickness. Note: If you press button B twice within a short period of time, the machine will go into
manual mode. In manual mode, simply use left encoder F to set the wire feed speed and right encoder G to set the
arc voltage.
3) Pull the trigger and weld.