HTC Evo 4G LTE, Руководство пользователя

Страница: 222 / 246

Tools and Calendar 210
4. Touch the headset
’s name in the Paired phones section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit
documentation to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect or
Unpair From a Bluetooth Device , and then follow the steps in Connect a Bluetooth Headset or
Car Kit .
Disconnect or Unpair From a Bluetooth Device
If you do not need to use Bluetooth at any given point, you can disconnect and unpair your
phone from a Bluetooth device.
Disconnect a Bluetooth Device
1. Open the Notifications panel, and then touch .
2. Touch Bluetooth . The Bluetooth screen opens.
3. In the Paired phones section, touch the name of the phone to disconnect.
4. Touch OK .
Note: Touch the name of the phone to reconnect it.
Unpair From a Bluetooth Device
1. Open the Notifications panel, and then touch .
2. If Bluetooth is off, touch the Bluetooth On/Off switch to turn it on
3. Touch Bluetooth . The Bluetooth screen opens.
4. In the Paired phones section, touch next to the phone to unpair.
5. Touch Unpair .
Send Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled phone such as a phone or notebook computer. The first time you transfer information
between your phone and another phone, you need to enter or confirm a security passcode.
After that, your phone and the other phone are paired, and you will not need to exchange
passcodes to transfer information in the future.
Important: Before you begin, set the receiving phone to discoverable mode. You may also
need to set it to “Receive Beams” or “Receive Files.” Refer to the phone’s
documentation for instructions on receiving information over Bluetooth.
You can send the following types of information, depending on the phone you are sending to: