HTC 400 DS, Руководство пользователя

Страница: 9 / 38

HTC 400 DS Introduction
2.0 1
1. Introduction
1.1. General information
HTC 400 DS is a grinder that can be used to grind, strip, clean and
polish concrete, natural stone and terrazzo floors. The machine's
area of application depends on the choice of tool.
Read the manual carefully so that you are totally familiar with
the machine before you start using it. Contact your local retailer
for further information. For contact information, see Contact
Information at the start of the manual.
1.2. Responsibility
Even though every effort has been made to make this manual as
complete and accurate as possible, we bear no responsibility for
incorrect or missing information. HTC reserves the right to change
descriptions in this manual without giving prior notice.
This manual is protected by the Copyright Act and no part of
it may be copied or used in any other way without the written
approval of HTC.
1.3. Manual
In addition to the general functions, this manual deals with the
areas of application and the maintenance of the grinder.
1.3.1. Safety instructions – Explanation of symbols
A number of symbols are used in the manual to highlight the most
important sections, see below. In order to avoid both personal
injury and material damage as far as possible, it is extremely
important to read and understand the text next to these symbols
particularly carefully. There are other symbols indicating practical
tips. These are to help you use the machine in the easiest and most
effective way.
The following symbols are used in the document to indicate where
special attention is needed.