HTC 400 DS, Руководство пользователя

Страница: 23 / 38

HTC 400 DS Operation
2.0 15
4.2. Handle settings
The picture below shows the handle positions on the machine.
Figure 4-1 Handle settings
1. The forward position - used, for instance, for
transportation, as the machine takes up significantly less
space.
2. Rear position - used for tipping the machine to make tool
replacement easier.
3. Working position - the working height can be adjusted to
two positions using the machine’s adjustable handle.
• Lock the handle in the required position using the locking
mechanism located on the underneath of the handle cover.