I-V400w - I-V500w - SOLAR I-Vw - SOLAR I-Ve
EN - 57
7.3.2. Recall data of I-V curve tests at display
1. Press
ESC/MENU
key to back to the main menu, select
the “
MEM
” item and confirm with
ENTER
to access inside
the section od saved data
2. Using arrows keys (
,
) and the arrow key
select the
item “
Recall
”, the item “
I-V Test
”
and confirm with
ENTER
for the visualization of I-C curve results only
3. The “DATA” label means the date/hour od saved data on
meter
15/05/10 15:34:26
MEM DATA
001
08/04/2010 10:38
002
13/04/2010 12:15
Y i e l d
T e s t
V i e
I - V T e s t
R e c a l l
D e l e t e
Select
MEM I - V
4. Use arrow key
to select the “Comments” label
5. The description gives by the user during the data saved
operation (see § 7.2) is displayed
6. The symbol “*” near the number of measure means that
the meter have performed the I-V curve test with recording
of irradiance/temperature values by use of remote unit
SOLAR-02, but this values did not transferred or are not
available.
For this measurements the translated STC
values won’t be available
15/05/10
15:34:26
MEM Comments
001
MODULE # 1
002*
MODULE # 2
Select
MEM I - V
7. By means of the arrow key
, select the “parameters”
label.
8. The markers relevant to Installation, String and Module
selected by the user during the saving procedure (§ 7.2)
are shown on the display.
9. Press
ESC/MENU
to exit the screen and to go back to the
main menu.
15/05/10
15:34:26
MEM IMP
STR
MOD
001
0 0 1
0 0 1
0 0 1
002
0 0 1 0 0 1 0 0 2
Select
MEM – IV
