I-V400w - I-V500w - SOLAR I-Vw - SOLAR I-Ve
EN - 10
5.1.2. Measurement
units
This § allows setting the default measurement units of some internal parameters included
in the database (DB) for the management of PV modules (§ 5.3)
1. Move the cursor to “
Meas. Unit
” by means of the arrow
keys (
,
) and confirm with
ENTER.
2. The display shows the screen which allows selecting the
measurement units of parameters shown by the meter.
3. Press
ESC/MENU
to exit without saving any setting.
15/05/10 15:34:26
P a r a m e t e r
E N T E R t o s e l e c t
M E N U
4. Move the cursor to “
Parameter
” by means of the arrow
keys (
,
) and confirm with
ENTER.
5. The display shows the screen which allows selecting the
measurement units of typical parameters of the modules:
Alpha
possible selection: “%/°C” and “mA/°C”
Beta
possible selection: “%/°C” and “mV/°C”
Gamma
possible selection: “%/°C” and “W/°C”
Tolerance
possible selection: “%” and “W”
6. Set the desired units by means of the arrow keys (
,
).
7. Confirm with
SAVE
and the “Saved data” message is
displayed for a while. Press
ESC/MENU
key to exit without
saving and to go back to the previous screen.
15/05/10 15:34:26
A l p h a
:
m A / ° C
B e t a
G a m m a
T o l e r a n c e
: m V / ° C
: W / ° C
: %
SAVE to store data
S E T
5.1.3. Date/Time
1. Move the cursor to “
Date/Time
” by means of the arrow
keys (
,
) and confirm with
ENTER
2. The display shows the screen which allows setting the
system date/time both in the
European (EU)
or
USA (US)
format.
3. Set the values by means of the arrow keys (
,
).
4. Confirm with
SAVE
and the “Saved data” message is
displayed for a while. Press
ESC/MENU
key to exit without
saving and to go back to the previous screen.
15/05/10 15:34:26
Y e a r
:
2 0 0 9
M o n t h
D a y
H o u r
M i n u t e
F o r m a t
: 0 6
: 1 5
: 0 9
: 5 3
: E U
SAVE to store data
S E T
