01/2014
Powerline HDS 230
9
HDS 230
Shredding hard drives
Place the hard drive in the recess (1) and push the slider
up to the top (2).
The disk is dropped into the cutting unit and is shredded.
Stopping cutting unit and conveyor
• Press the start button again.
The cutting block and conveyor stop.
The shredder switches to standby mode.
Switching off the shredder
• Turn the main switch to
0
.
You can secure the main switch in this
position using a padlock.
Check the following before calling customer service:
• Is the power plug connected?
• Is the shredder switched on?
• Is the
fl
ap closed?
• Is there a jam in the shredder?
• Has the motor been overloaded?
Overload due to jam
“Overload” display (level 1 or level 2 – de-
pending on the machine model) lights up.
The cutting block automatically runs in
reverse for several seconds. Then the
cutting unit switches off.
Caution!
The blade rollers can still cause injuries
even while they are not running. Do not
reach into the cutting apparatus! Wear
safety gloves!
Do not alternately press the “Forwards” and
“Reverse” buttons to remove the blockage.
This will damage the shredder.
• Take out the hard drives.
• Press the start button and feed the disks
into the cutting unit one after the other.
8 Malfunctions
Machines with cut size 20 x 30 - 50 mm
Machines with cut size 11,5 x 26 mm
1
2
1
2