manualshive.com logo in svg

HSM powerline hds 230, Руководство по эксплуатации, Страница: 6 / 16

Поделиться
Скачать
HSM powerline hds 230 Скачать руководство пользователя страница 6

6  

 

Powerline HDS 230

 01/2014

HDS 230

•  The transport device (e.g. hand pallet truck) must be 

correspondingly rated for the weight of the machine.

•  Place the pallet with the shredder in its packaging on 

a smooth, level surface.

•  The shredder may only be placed in dry rooms on 

a hard, level 

fl

 oor – not on carpets. The 

fl

 oor load on 

each roller is approximately 200 kg (single-stage ma-
chines) respectively 320 kg (double-stage machines).

•  Place the machine in such a way that the power plug 

is easily accessible and the ventilation slots are free.

•  The machine must be connected to a power source 

which meets the speci

fi

 cations on the nameplate. 

Make sure the power cable is unobstructed and that 
nobody can tread on it. 
Connect the power plug of the machine into a properly 
installed socket.

•  Lock the front castors by pressing down the brake lever.

•  Push the conveyor belt under the machine.
•  Screw the machine and conveyor belt together using 

the 4 safety screws M 8x16 (1).

•  Insert the plug (2) for the conveyor belt connector into 

the coupling and lock it into place.

5 Transportation, 

installation

1

2

Содержание powerline hds 230

















Отзывы:

Нет отзывов