HSM powerline hds 230 Скачать руководство пользователя страница 3

01/2014 

Powerline HDS 230

 

  

3

HDS 230

•  Switch off the shredder, disconnect the power plug 

and call customer service in the following circum-
stances:

Power cables or plugs are damaged

Liquid has entered the shredder

The shredder has been exposed to rain

The machine does not work properly despite the 

 

operating manual having been observed

The shredder has been damaged

Switch off the shredder and pull 
out the power plug

 before

 

moving 

or cleaning the shredder, or any other 
task outside its normal scope of use.

Maintenance and service tasks may 
only be performed by HSM customer 
service and service engineers of our 
dealers.

Notice 

Danger from improper use

Only operate this machine in accordance with the instruc-
tions outlined in “Proper use”.

The hard drive shredder is designed for shredding hard 
drives up to 3.5", CDs/DVDs, magnetic tapes up to 3.5", 
USB sticks and disks.
Our general business conditions are applicable.

 

We pro-

vide a one year warranty for the hard drive shredder.

 

The 

warranty period is 6 months when used in multiple shifts. 
This warranty excludes wear, damage due to improper 
handling, natural depreciation, and actions taken by third 
parties.

Operating controls for your safety

Emergency stop

In the event of danger, press the 
emergency stop button immediately.
This switches off the shredder, and 
stops the cutting block and exit con-
veyor.

Main switch

In the event of danger, turn the main 
switch to “0”.
You can secure the main switch in 
this position with a padlock to prevent 
restarting.

2 Safety 

instructions

Before using the machine for the 

fi

 rst time, 

read the operating manual, and keep it for 
later use.

•  Observe all safety instructions attached to the machine.
•  Ensure that no unauthorised persons can access the 

hard disk shredder.

 

•  Do not leave the hard disk shredder switched on when 

it is unattended.

 

The shredder may not be operated by 

anyone under 16 years of age. 

WARNING

Risk of injury

Do not reach into the feed opening. 
Wear protective gloves when elliminating jam.

Danger of injury during intake

Do not go near the feed opening with long 
hair, loose clothing, ties, scarves, necklaces, 
bracelets etc. 
Do not destroy any material which might 
become tangled, such as tapes, binder 
ties or foil.

•  When the machine is not in use, it must be shut down 

and secured against unauthorised use. To do so, you 
can secure the mains switch with a padlock when it is 
in the off position. 

•  Do not remove or modify safety devices which guar-

antee the safe operation of the machine.

•  No platforms or other raised surfaces may be placed 

near the shredder if they encroach on the speci

fi

 ed 

safety clearances.

•  Carry out inspection and maintenance regularly.

Translation of the original operating instructions

1  Proper use, warranty

Содержание powerline hds 230

















Отзывы: