HSM FA 500.3, Руководство по эксплуатации

Страница: 6 / 24

6
1005
FA 500.3
Mount the loading table onto the unit:
• Attach the table using the M 10 nuts (1)
Lock the front castors by pressing down the brake lever.
1
• Insert the plug (connection for emergency stop switch
bar) into the socket next to the main switch and turn it
to stop.
1
• Insert the machine’s power plug into the
CEE 3x32 A + N + PE connection socket on the
application site.
Notice: Extension cables are not permitted.
5 Transportation, installation
• During transport, observe the high centre of gravity of
the paper shredder!
• Place the pallet with the shredder in its packaging on
a smooth, level surface.
• Observe the instructions for unpacking.
• If you need to move the shredder through narrow
doors, you can wait until it is at its fi nal location before
fi tting the loading tray. Without the tray, the machine is
only 900 mm wide.
• The shredder may only be placed in dry rooms on
a hard, level fl oor – not on carpets. The fl oor load
on each roller is approximately 200 kg respectively
230 kg (machines with cutting unit 1.9 x 15 mm).
• The machine must be connected to a power source
which meets the specifi cations on the nameplate.
Make sure the power cable is unobstructed and that
nobody can tread on it