HS-Technik RivBee RBL-15x Скачать руководство пользователя страница 52

Страница: 52 / 60

- 52 -

4.4

Maintenance and service

Apart from the regular cleaning and the inspection and maintenance of the clamping jaws

the battery blind riveting device is largely maintenance-free.

WARNING

Risk of injury as a result of improper handling!

Repair, maintenance and care of riveting tools must be completed

professionally. After the work, no risk for the operator should exist during

proper use. The operator may only conduct the work described here.

4.5

Cleaning

NOTE

Observe the following information for cleaning your riveting device. Incorrect

cleaning solutions or improper procedures when cleaning can lead to damage

to the riveting device.

4.5.1 General information

Do not use any degreasing or corrosive cleaning solutions and no water. Do not spray

any cleaning solutions, solvents or easily flammable materials into the openings of the

housing! The guide pipe for guiding the blind rivet in the collection container should be

cleaned daily (carefully blown out from behind with compressed air), in order to remove

dust and shavings.

Clean the battery contacts and the battery connection on the tool with a cloth, cotton

swab and a little alcohol when necessary.

Содержание RivBee RBL-15x





























































Результаты поиска

Содержание RivBee RBL-15x

Отзывы:

Похожие инструкции для RivBee RBL-15x

Бренды по названию

Популярные бренды

HS-Technik RivBee RBL-15x, Руководство по эксплуатации

Результаты поиска

Содержание RivBee RBL-15x

Отзывы:

Похожие инструкции для RivBee RBL-15x

Бренды по названию

Популярные бренды