HS-Technik RivBee RBL-15x Скачать руководство пользователя страница 12

Страница: 12 / 60

- 12 -

2 General safety information for power tools

DANGER

Read all the safety information, instructions, illustrations and technical data

which is provided with this power tool. Failure to follow the instructions

below may result in electric shock, fire and/or serious injury.

WARNING

This power tool was manufactured in according with current state-of-the-art

technology and recognised technological safety guidelines. However, its use

may jeopardise the health and life of the user or third parties, or risk damage

to other property.

WARNING

The workplace must only be used in accordance with its intended use and in

absolutely perfect condition.

NOTE

Keep all safety information and instructions for the future.

NOTE

Only have your device repaired by qualified professional staff and only with

original replacement parts which are available at HS Technik GmbH.

This

ensures that the safety of the device is maintained.

The term „power tool” used in the safety information refers to mains-operated power

tools (with mains cable) and to battery-operated power tools (without mains cable).

2.1

Occupational safety

Keep your work area clean and well-lit.

Cluttered or dark work areas can lead to accidents.

Do not work with the power tool in an explosive environment in which there are flamma

ble liquids, gases or dust.

Power tools generate sparks that can ignite the dust or fumes.

Keep children and other people away while using the power tool.

You can lose

control of the power tool if you are distracted.

Содержание RivBee RBL-15x





























































Результаты поиска

Содержание RivBee RBL-15x

Отзывы:

Похожие инструкции для RivBee RBL-15x

Бренды по названию

Популярные бренды

HS-Technik RivBee RBL-15x, Руководство по эксплуатации

Результаты поиска

Содержание RivBee RBL-15x

Отзывы:

Похожие инструкции для RivBee RBL-15x

Бренды по названию

Популярные бренды