HS-Technik HST-MV3-02 Скачать руководство пользователя страница 4

Страница: 4 / 32

- 4 -

1 Operating principles

Dear customers,

thank you for choosing a HS-Technik GmbH product.

This quality product „Made in Germany“ fulfils the highest requirements with regard to

performance, quality and accuracy. When used correctly the product will undoubtedly

perform very well for many years.

These operating instructions contain information on safety and for the operation of the

charger. In addition it contains information on the dimensions and technical data. We

would be happy to assist you with additional information or to answer your questions.

Our technical support and our technicians would be happy to assist you.

1.1

Scope of delivery

•

Charging station

•

Power supply cord

•

Operating instructions

1.2

General information

Read the operating instructions before initial operation.

Please pay particular attention

to Chapter 2 „General Safety Notes“.

This operating instruction should make it easier for the operator to get to know the

charger and to use it for its intended purpose. The operating instructions include

important information related to the safe and proper operation of the charger.

Compliance with these instructions helps you to:

•

Avoid hazards

•

Avoid repair costs and downtimes

•

Increase the reliability and the lifespan of the product.

Содержание HST-MV3-02

































Результаты поиска

Содержание HST-MV3-02

Отзывы:

Похожие инструкции для HST-MV3-02

Бренды по названию

Популярные бренды

HS-Technik HST-MV3-02, Руководство по эксплуатации

Результаты поиска

Содержание HST-MV3-02

Отзывы:

Похожие инструкции для HST-MV3-02

Бренды по названию

Популярные бренды