HS-Technik HST-MV3-02, Руководство по эксплуатации

Страница: 18 / 32

- 18 -
3.2.2 Explanation of the LED signals / functions
LED signals Function
Akku defekt
Volt Limit Temperatur
Temperaturkontakt fehlt Laden
Akku voll
ON
OFF
When the charging station is not in use, it switches to
sleep mode. In order to be able to charge a battery, the
station must be activated by pressing the "wake up"
button. This is located on the lower left of the front side. If
the button is lit green, the charging station is switched on
and batteries can be charged.
battery defective
voltage limit temperature
temperature contact missing charging
battery full
ON
OFF
Continuously lit red:
Battery is charging
Continuously lit green:
Battery is fully charged
Blinking blue:
Temperature is too high or too low to charge. If the
temperature of the battery is below 10° C, the LED will
blink blue and the charging station will only charge
the battery with a low current up to a temperature of
10° C has been reached. From then on, the station will
charge the battery normally. The same applies when the
temperature of the battery exceeds 55° C; the battery will
also be charged with a low current until the temperature
of the battery drops below 55° C.
Blinking red/blue:
The charging station cannot find a temperature contact.
In most cases, the battery contact is defective or
damaged.
battery defective
voltage limit temperature
temperature contact missing charging
battery full
ON
OFF
Blinking red:
The battery is defective. The charging station cannot find
a measurable voltage.
battery defective
voltage limit temperature
temperature contact missing charging
battery full
ON
OFF
Blinking yellow:
The battery voltage is too high or too low for the battery
type. This battery cannot be charged.