HIROSE ELECTRIC CO.,LTD.
ETAD-T0947-00
0
28
/
32
FORM HC0011-9-2
△
Female connector:
1
– Using the dedicated tool, release the lock of the retainer and return to the pre-set state.
Cross section of connector
Insert the dedicated tool
Place the tool on the retainer
to housing (lock lever side).
and push in the direction indicated by the arrow
Note: Please return to the pre-set state position when the retainer drops out.
Dedicated tool
Dedicated tool
Retainer
When the tool is pushed into, the retainer returns to the pre-set state.
Make sure that the retainer is in the pre-set state for both left and right.
Feb.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
