HIROSE ELECTRIC CO.,LTD.
ETAD-T0947-00
0
20
/
32
FORM HC0011-9-2
△
7.
WIRING HARNESS ASSEMBLY RECOMMENDATIONS
Deformed or damaged parts have to be replaced by a new one.
Apply tape so that every individual wire is subjected to an equal amount of tensile
force to avoid any effect on terminals (like disengagement).
The distance to apply tape from the end of connector is 35mm minimum.
The bending radius for wires should be at minimum 3 times its outer radius to
ensure normal use of our connectors.
Feb.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
