manualshive.com logo in svg

HRC 2006 CBR1000RR, Инструкция по установке/Список запчастей, Страница: 98 / 162

Поделиться
Скачать
HRC 2006 CBR1000RR Скачать руководство пользователя страница 98

2-78

Racing Kit

Installation

Install the rear wheel as follows:
1. Install the rear wheel into the swingarm and tem-

porarily install the each parts.

2. Adjust the drive chain free play by turning the

drive chain adjusting bolts (1).
Make sure the axle is installed smoothly.

3. Temporarily tighten the rear axle.
4. Secure the drive chain adjusting bolts by tighten-

ing the lock nuts (2).

5. Hand tighten the stopper screws (12) until the

screw just touch the left rear axle side collar (10)
and right rear axle side collar (6).

Note that the axle side collars are tilt when tighten-
ing the the stopper screws.

6. Secure the stopper screws by tightening the lock

nuts (11).

7. Loosen the rear axle and check that there are no

free play on adjusting plate (8, 16).

8. Make sure the axle is installed smoothly without

stress.

9. Tighten the rear axle to the specified torque.

• Do not pull the rear wheel applying the external

force by installing the T wrench between the drive
chain and driven sprocket while tightening the
rear axle.
The alignment of a rear wheel may not coming
out and the axle’s actual torque is lowered by the
friction of the axle.

• Make sure the rear axle threads are seated to the

axle nut threads before tightening the axle using
the impact wrench.

Rear Axle Illustration (view from rearward)

(1) DRIVE CHAIN ADJUSTING BOLT
(2) DRIVE CHAIN ADJUSTING BOLT LOCK NUT
(3) DRIVEN FLANGE LEFT SIDE COLLAR
(4) DRIVEN FLANGE
(5) DRIVEN FLANGE RIGHT SIDE COLLAR
(6) REAR AXLE RIGHT SIDE COLLAR
(7) REAR AXLE
(8) LEFT DRIVE CHAIN ADJUSTING PLATE
(9) REAR AXLE NUT

(10) REAR AXLE LEFT SIDE COLLAR
(11) STOPPER SCREW LOCK NUT
(12) STOPPER SCREW
(13) REAR WHEEL
(14) REAR BRAKE CALIPER BRACKET
(15) BRAKE DISC
(16) RIGHT DRIVE CHAIN ADJUSTING PLATE
(17) WASHER

(1)

(2)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(12)

(11)

(16)

(17)

(7)

(1)

(2)

(6)

(3)

(4)

(5)

02. Racing Kit_P1  06.2.20 6:55 PM  Page 78

Содержание 2006 CBR1000RR



































































































































































Отзывы:

Нет отзывов