HRC 2006 CBR1000RR, Инструкция по установке/Список запчастей, Страница: 10 / 162

Service Information
1-4
Item
Thread/ Torque
Remarks
pitch N•m (kgf•m, lbf•ft)
Fuel tank cap socket bolt M4 x 0.7 4.9 (0.5, 3.6)
Fuel hose banjo bolt (tank side) M12 x 1.25 26 (2.7, 20)
ECT sensor M12 x 1.5 23 (2.3, 17)
Swingarm pivot adjusting bolt M36 x 1.5 15 (1.5, 11) Apply molybdenum grease to the threads
Swingarm pivot adjusting bolt lock nut M36 x 1.5 59 (6.0, 43) Apply molybdenum grease to the threads
Swingarm pivot nut M22 x 1.5 118 (12.0, 87) Apply molybdenum grease to the threads
Clutch oil bleeder bolt M10 x 1.25 23 (2.3, 17)
Clutch bleeder screw M8 x 1.25 7.8 (0.8, 5.8)
Rear wheel bearing retainer M56 x 1.0 98 (10.0, 72) Apply LOCKTITE 271
Rear brake disc bolt M6 x 1.0 16 (1.6, 12) Apply LOCKTITE 271
Rear axle M18 x 1.5 98 (10.0, 72) Apply molybdenum grease to the threads
Final driven sprocket nut M8 x 1.25 34 (3.5, 25) Apply oil to the threads
Rear brake oil bleeder bolt M10 x 1.25 23 (2.3, 17)
Rear brake bleeder screw M8 x 1.25 7.8 (0.8, 5.8)
Rear brake caliper mounting bolt M7 x 1.0 17 (1.7, 12) Apply molybdenum grease to the threads
Front wheel axle M18 x 1.5 59 (6.0, 43) Apply molybdenum grease to the threads
Frame
Item
Thread/ Torque
Remarks
pitch N•m (kgf•m, lbf•ft)
Shift drum stopper plate bolt M6 x 1.0 12 (1.2, 9) Apply LOCKTITE 271
Alternator stator mounting bolt M6 x 1.0 12 (1.2, 9) Apply oil
Starter motor terminal nut M6 x 1.0 12 (1.2, 9) Apply oil
Spark plug M10 x 1.0 14 (1.4, 11)
Main oil gallery sealing taper plug PT1/8 12 (1.2, 9) Apply Three bond 1207B
Neutral switch M10 x 1.25 12 (1.2, 9)
ECT sensor M12 x 1.5 23 (2.3, 17)
Insulator band M5 x 0.8 – Band width: 7 ± 1 mm
Water hose band – – Tightening width: 1 mm on each side
Air funnel bolt M5 x 0.8 6.8 (0.7, 5.1) Wire lock
01. Service Information_P1 06.2.20 6:52 PM Page 4