HRC 2006 CBR1000RR, Инструкция по установке/Список запчастей, Страница: 7 / 162

1. Service Information
1-1
General Information
• This Set-up Manual contains information for CBR1000RR Racing Kit.
• Refer to Shop Manual for service procedures and data not included in this manual.
Service Data
Different items between standard CBR1000RR and Racing kit installed CBR1000RR.
Item 2006 Standard 2006 Racing Kit (Super Bike Kit)
Engine Type Water cooled 4-stroke DOHC 16 valve
Cylinder arrangement 28˚ inclined inline four
Bore and stroke 75.0 x 56.5 mm (2.95 x 2.22 in)
Displacement 998.4 cm
3
(60.9 cu-in)
Compression ratio 12.1 : 1 14.5 : 1
Cylinder head gasket thickness t0.7 t0.6
Valve clearance IN 0.16 ± 0.03 mm (0.006 ± 0.001 in) 0.20 ± 0.02 mm (0.008 ± 0.001 in)
EX 0.30 ± 0.03 mm (0.012 ± 0.001 in) 0.30 ± 0.02 mm (0.012 ± 0.001 in)
Valve train DOHC, chain driven
Valve timing Intake opens 18˚ BTDC 22˚ BTDC
closes 46˚ ABDC 58˚ ABDC
Exhaust opens 39˚ BBDC 53˚ BBDC
closes 11˚ ATDC 22˚ ATDC
Valve lift Intake 9.1 mm 9.5 mm
Exhaust 8.4 mm 9.0 mm
Fuel deliverly system PGM-DSFI, ø44
Electrical Spark plug NGK: IMR9C-9HES, DENSO: VUH27ES NGK: R0045Q-10
• Honda’s testing has shown that the optimum overall performance of the Honda CBR1000RR engine power up kit can be obtained by using appropriate exhaust
system.
• No testing was done to verify serviceability or overall quality. Honda makes no claim and assumes to responsibility as to the reliability or quality of these com-
ponents.
Use unleaded premium gasoline (research octane number 100)
01. Service Information_P1 06.2.20 6:52 PM Page 1