HR FHD264-R, Руководство пользователя

Страница: 12 / 28

FHD264
12
© Copyright 2018 Hall Research, Inc.
Figure 9 - Receiver WebGUI
4.3 Telnet Control
FHD264 offers an extensive telnet control instruction set to provide full control of the system.
The default telnet port is
9999 . When connected, the following prompt will be displayed on the
terminal:
Figure 10 - Telnet terminal message
Note:

Commands are case sensitive - use lowercase characters as shown.

Invalid commands result in “Unknown Input Command”.

The “list <CR>” command displays the list of available commands.
All Commands are Terminated
by <CR><LF> (or Hex 0D 0A)
Response Function
set_group_id n
where n=0-1023
OK – Success
Error – Fail
Set Group ID
get_group_id n
where ‘n” returns the group ID
Query the current group ID status
set_dhcp OK – Success
Error – Fail
Set to DHCP mode
get_dhcp On – DHCP
Off – No DHCP
Query the DHCP status
Set_uart_baudrate n OK – Success Set the baud rate for the RS-232