Dynamic Virtual Matrix™
© Copyright 2018 Hall Research, Inc.
13
All Commands are Terminated
by <CR><LF> (or Hex 0D 0A)
Response
Function
Where n = 2400, 4800, 9600, 19200, 28800,
28400, 57600, 115200
Error – Fail
on the unit
get_uart_baudrate
n
where n = baud rate
Query the current baud rate
setting in the unit
set_static_ip ip [ip(n.n.n.n)]
netmask [ip(n.n.n.n)]
gateway [ip(n.n.n.n)]
Where:
ip [ip(n.n.n.n)] =IP xxx. xxx. xxx. xxx
netmask[ip(n.n.n.n)]=netmask 255.255.xxx.xxx
gateway [ip(n.n.n.n)] = gateway xxx. xxx. xxx.
xxx
OK – Success
Error – Fail
Set the static IP configuration for
the unit
get_static_ip IP:
192.168.1.xx
Netmask: 255.255.0.0
Gateway: 192.168.1.1
Returns the current static IP
configuration
get_mac_address
XX: XX:XX:XX:XX:XX
Query the MAC address of the unit
get_lan_status Link_Up/Link_Down
Query LAN Status whether device
is UP and connected to the switch
get_ip_config IP:
XXX.XXX.XXX.XXX
Netmask:
XXX.XXX.XXX.XXX
Gateway:
XXX.XXX.XXX.XXX
Shows IP Configuration settings
get_hdcp_status On/Off
Where On - Input Video with HDCP
Off- Input Video without HDCP
Query the HDCP status of the
video input
get_video_lock Lock
Unlock
Where Lock – Stable Input Signal
Unlock - No input video or unstable
Query the video stability status
set_session_key [0xhhhh(1~32)]
OK-Success
Error-Fail
Where [0xhhhhh(1~32)]=0x000000~0xffff
Set session key for encryption
set_screen off|on
(Receiver ONLY)
Where off=blank on=unblank
OK – Success
Error – Fail
Set video blank/unblank the
screen
get_screen
(Receiver ONLY)
on
off
Query the device output status
set_page_login [string(off|on)]
where off = Disable login for the web page
session (default)
on= Enable login for theweb page.
OK – Success
Error – Fail
Set the login page for the WebGUI
get_page_login on
off
Query the webpage” login enable”
status
set_video_bitrate
(Sender ONLY)
[string(fhd|hd|sd)][n(2000~18000)]
Where: string(fhd|hd|sd)][n(100~25000)] can
be fhd, hd, sd and 12000
For example:
set_video_bitrate fhd 12000
OK – Success
Error – Fail
Set the max bit rate for the TX to
sender over the network. Limits
apply see Section 10
get_video_bitrate [string(fhd|hd|sd)]
(Sender ONLY)
xxxx
Query the bit rate for the TX
Содержание FHD264-R
Страница 26: ...FHD264 26 Copyright 2018 Hall Research Inc...
Страница 27: ......
Страница 28: ...Copyright 2018 Hall Research Inc All rights reserved 1163 Warner Ave Tustin CA 92780 Ph 714 641 6607...