HR FHD264-R, Руководство пользователя

Страница: 20 / 28

FHD264
20
© Copyright 2018 Hall Research, Inc.
Fail-Safe in the Receiver can be configured using the WebGUI or Telnet. If the Receiver is
displaying video from its Fail-Safe group, the following messages will be displayed on the front
panel LCD, OSD, and WebGUI.
Figure 17 -Fail safe notifications
Note: The FS Group ID cannot be same as the Main Group ID of the Receiver. If they are
the same, then Fail-Safe will be disabled automatically.
5.7 IR
FHD264 Supports both IR pass through and IR Control using a single wideband IR detector.
Any IR signal received in the range of 32-56 KHz at the Receiver will be sent to the Sender in
the group. The Sender can receive IR signals from multiple receivers on a first come, first
served basis. This allows the user to control the IR devices at the Sender end from multiple
Receiver locations. Note that to send an IR signal to a device at the Sender end, the Receiver
must be in the same group as the Sender.
Figure 18 – IR