HPI Racing reactor 500, Инструкция по эксплуатации

Страница: 31 / 134

29
During the charging or discharging process the user can access various information about the
program settings. By pressing the “DEC” key the Reactor 500 will display the users settings in order.
By pressing the “INC” key a display of each cells voltage is shown.
End Voltage
12.6V(3S)
If the program has ended then the final voltage will be displayed
IN Power Voltage
12.6V(3S)
The real time internal DC voltage is displayed
DEC
The temperature probe readings are shown when in use
Ext. Temp ----
Various program information screens
Capacity Cut-Off
The capacity cut off settings are displayed
ON 5000mAh
Safety Time
The safety timer settings are displayed
ON 120min
USB/Temp Select
The temperature cut off settings are displayed
80°C Temp Cut-Off
DEC
DEC
DEC
DEC
If the battery is connected via the balancing lead, then you can check the
voltage of each cell in the pack by pressing the “INC” key. Up to 6 cells
can be displayed.
4.07 4.06 0.00 V
0.00 0.00 0.00 V