HPI Racing reactor 500, Инструкция по эксплуатации

Страница: 21 / 134

19
Fast charging a Lithium battery
LiPo FAST CHG
2.0A
11.1V(3S)
DEC INC DEC INC
START
ENTER
BATT
STOP
CONFIRM (ENTER)
R: 3SER S: 3SER
The value on the left on the second line is the current. After setting the
current and voltage, press START/ENTER key for 3 seconds or more to
start the process. (Current: 0.1-5.0A Voltage: 3.7-22.2v)
This display shows the number of cells detected by the charger and the
number set manually by the user. “R” is the chargers reading. “S” is the
user set value, set previously. If both numbers are the same you can
start charging by pressing the START/ENTER Key. If not press
BATT.TYPE/STOP key to go back and amend if needed.
This screen shows the real time status during the charge process. Press
BATT.TYPE/STOP key once to stop the charge process.
The “FAST CHG” function is for fast charging your battery. During this process the charger will
reduce the current fed to the battery towards the end of the charge process. The charging current
will reduce to 1/5th in the last 1/10th of the charge process. The charge capacity will be a little
smaller, but charging times are greatly reduced.
START
ENTER
LP3S 1.2A 12.59V
FAS 22:43 00682
Number
of cells
Charging
Current
Charging
Time
Charged
Capacity
Battery
Voltage
>3 Seconds
Charging a Lithium battery in fast charge mode