HPF XTR2, Руководство пользователя

Страница: 9 / 17

Cross Trainer XTR2
7
11. Attached seat (#59) onto the end of the seat
tube (#58). Use 3 pieces of spring washers
and 3 nylon nuts ban tighten them, Insert the
bellow (#6) to the seat tube.
12. Attached the seat tube w/bellow insert into the
tube of the end part of the tracer.
Use the tri-knob to adjust the height for your
need.
Tension Adjustment
The assembly of your XTR2 is now complete. As you try it for the first time, you should adjust the tension to a
desirable level before you begin a full workout.
13. For minute tension adjustment, simply use the tension adjustment knob found at the top centre. Tension
level can be manipulated this way to vary intensity of workout as you exercise.
14. For greater tension adjustment, you may loosen or tighten the friction belt (#35) by re-strapping it. To do so,
first tum the tension adjustment knob all the way to the loosest setting. Then re-strap the belt at the buckle
on the main frame, just beneath the flat beam at the top centre. The more length you allow for the friction
belt to wrap around the wheel, the less friction it will cause. Re-adjust the tension knob after you finished re-
strapping.