HPE ProLiant DL325, Руководство по техническому обслуживанию и ремонту

Страница: 85 / 144

6. Install the heatsink.
a. Align the heatsink screws with the processor nuts correctly.
b. Using a T-20 screwdriver, fully tighten the four captive heatsink screws in the order indicated on
the heatsink label. Otherwise, boot failure or intermittent shutdowns might occur.
7. Install all the components removed from the system board.
IMPORTANT: Install all components with the same configuration used on the failed system
board.
8. Install the access panel.
9. Install the server into the rack.
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server.
13. If removed, install the bezel.
14. Ensure all firmware, including option cards and embedded devices, is updated to the same versions
to ensure that the latest drivers are being used.
15. Re-enter any Secure Boot Keys that were previously added in the Secure Boot configuration.
16. Re-enter the server serial number and the product ID .
Re-entering the server serial number and product ID
After you replace the system board, you must re-enter the server serial number and the product ID.
Removal and replacement procedures 85