HPE ProLiant DL325, Руководство по техническому обслуживанию и ремонту

Страница: 48 / 144

4. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
5. Remove the access panel .
6. Remove any expansion boards installed in the primary riser board .
7. Remove the primary riser cage .
8. Remove the riser board from primary riser cage.
a. Remove the two T-15 screws securing the riser board to the riser cage.
b. Detach the riser board from the riser cage.
To replace the component, reverse the removal procedure.
Removing and replacing a PCIe blank
Prerequisites
Before you perform this procedure, make sure that you have T-15 screwdriver available.
Procedure
1. If installed, remove the bezel .
2. Power down the server .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
5. Remove the access panel .
48 Removal and replacement procedures