HPE ProLiant DL325 Gen10 Plus Скачать руководство пользователя страница 54

Страница: 54 / 149

• Installation by an HPE authorized technical specialist.

• Verification prior to installation that all service prerequisites are met.

• Delivery of the service at a mutually scheduled time convenient to your organization.

• Allows your IT resources to stay focused on their core tasks and priorities.

• Full coverage during the warranty period for products that require installation by an HPE authorized technical

specialist.

For more information on the features, limitations, provisions, and ordering information of the HPE Installation Service, see
this Hewlett Packard Enterprise website:

https://www.hpe.com/support/installation-service

Setting up the server

Prerequisites
Before setting up the server:

• Download the latest SPP:

http://www.hpe.com/servers/spp/download

Support validation required

• Verify that your OS or virtualization software is supported:

http://www.hpe.com/info/ossupport

• Read the HPE UEFI requirements for ProLiant servers on the

Hewlett Packard Enterprise website. If the UEFI

requirements are not met, you might experience boot failures or other errors when installing the operating system.

• Obtain the storage driver if needed:

◦

Download it from the HPE Support Center website:

http://www.hpe.com/support/hpesc

◦

Extract it from the SPP.

• Read the operational requirements for the server:

Operational requirements

• Read the safety and compliance information on the HPE website:

http://www.hpe.com/support/safety-compliance-enterpriseproducts

Procedure

Unbox the server

1. Unbox the server and verify the contents:

• Server

• Power cord

• Rack-mounting hardware (optional)

• Documentation

Setup

Содержание ProLiant DL325 Gen10 Plus






















































































































































Результаты поиска

Содержание ProLiant DL325 Gen10 Plus

Отзывы:

Бренды по названию

Популярные бренды

HPE ProLiant DL325 Gen10 Plus, Руководство пользователя

Результаты поиска

Содержание ProLiant DL325 Gen10 Plus

Отзывы:

Бренды по названию

Популярные бренды