1
2
2
Relocate the PEM nut and rubber stopper
This procedure is required if the PEM nut and rubber stoppers must be relocated to support the length of
the M.2 SSDs being installed.
Prerequisites
To remove the M.2 SSDs from the M.2 riser, you need a No. 1 Phillips screwdriver.
Procedure
1.
on page 21.
2.
on page 22.
3.
Place the server blade on a flat, level work surface.
4.
on page 22.
5.
Remove the left DIMM baffle.
on page 23.
6.
Remove the M.2 interposer board and the M.2 riser board
on page 27.
7.
Remove an M.2 SSD from the M.2 riser board
on page 26.
8.
Remove the rubber stoppers from the M.2 riser.
28
Operations
