HPE OfficeConnect 1950 Series Скачать руководство пользователя страница 21

Страница: 21 / 182

Menus Tasks

Interfaces

•

Display interfaces and their attributes, including:

{

Interface status.

{

IP address.

{

Speed and duplex mode.

{

Interface description.

•

Change interface settings.

•

Delete logical interfaces.

Link Aggregation

Create, modify, or delete Layer 2 aggregation groups.

Storm Constrain

•

Set the statistics polling interval.

•

Set storm control parameters.

•

Display storm control information.

Isolation

•

Create isolation groups.

•

Modify

isolation

groups.

Links

VLAN

•

Configure port-based VLANs.

•

Create

VLAN-interfaces.

Voice VLAN

•

Assign ports to voice VLANs.

•

Set the port mode to manual or automatic.

•

Set the voice VLAN mode to normal or security.

•

Configure the QoS settings for voice packets.

•

Add OUI addresses.

MAC

•

Create or delete static MAC entries, dynamic MAC entries, and
blackhole MAC entries.

•

Display existing MAC entries.

STP

•

Enable or disable STP globally.

•

Enable or disable STP on interfaces.

•

Configure the STP operating mode as STP, RSTP, PVST, or MSTP.

•

Configure instance priorities.

•

Configure MST regions.

LLDP

•

Enable or disable LLDP.

•

Modify the LLDP operating mode.

•

Modify the interface mode.

•

Configure LLDP to advertise the specified TLVs.

DHCP Snooping

•

Configure a port as a trusted or untrusted port.

•

Record and back up DHCP snooping entries.

•

Configure the following features for DHCP snooping ports:

{

MAC address check.

{

DHCP-REQUEST check.

{

DHCP packet rate limit.

{

Max DHCP snooping entries.

•

Enable support for Option 82. If Option 82 is enabled, you can configure
the handling strategy, the padding format, and the padding contents for
Option 82.

•

Configure the method to obtain an IP address (DHCP or static).

•

Configure the IP address or MTU of an interface.

•

Create a loopback interface.

Содержание OfficeConnect 1950 Series























































































































































































Результаты поиска

Содержание OfficeConnect 1950 Series

Отзывы:

Похожие инструкции для OfficeConnect 1950 Series

Бренды по названию

Популярные бренды

HPE OfficeConnect 1950 Series, Руководство пользователя

Результаты поиска

Содержание OfficeConnect 1950 Series

Отзывы:

Похожие инструкции для OfficeConnect 1950 Series

Бренды по названию

Популярные бренды